Regviz

Cypress Semiconductor /psoc63 /BLE /BLELL /SCAN_CONFIG

Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text Text

Interpret as SCAN_CONFIG

Share

Cut and paste this URL to share the unmodified register and value:

https://regviz.com/r/Cypress Semiconductor/psoc63/BLE/BLELL/SCAN_CONFIG#0x0

31 2827 2423 2019 1615 1211 87 43 0 0 0 0 0 0 0 0 00 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (SCN_STRT_EN)SCN_STRT_EN 0 (SCN_CLOSE_EN)SCN_CLOSE_EN 0 (SCN_TX_EN)SCN_TX_EN 0 (ADV_RX_EN)ADV_RX_EN 0 (SCN_RSP_RX_EN)SCN_RSP_RX_EN 0 (SCN_ADV_RX_INTR_PEER_RPA_UNMCH_EN)SCN_ADV_RX_INTR_PEER_RPA_UNMCH_EN 0 (SCN_ADV_RX_INTR_SELF_RPA_UNMCH_EN)SCN_ADV_RX_INTR_SELF_RPA_UNMCH_EN 0 (SCANA_TX_ADDR_NOT_SET_INTR_EN)SCANA_TX_ADDR_NOT_SET_INTR_EN 0 (RPT_SELF_ADDR_MATCH_PRIV_MISMATCH_SCN)RPT_SELF_ADDR_MATCH_PRIV_MISMATCH_SCN 0 (BACKOFF_ENABLE)BACKOFF_ENABLE 0SCAN_CHANNEL_MAP

Description

Scan configuration register

Fields

SCN_STRT_EN

Enable scan event start interrupt.
SCN_CLOSE_EN

Enable scan event close interrupt.
SCN_TX_EN

Enable scan request packet transmitted interrupt.
ADV_RX_EN

Enable adv packet received interrupt .
SCN_RSP_RX_EN

Enable scan_rsp packet received interrupt .
SCN_ADV_RX_INTR_PEER_RPA_UNMCH_EN

Enable ADV peer address unmatched interrupt. This bit is valid only if PRIV_1_2 PRIV_1_2 and PRIV_1_2_SCAN are set.
SCN_ADV_RX_INTR_SELF_RPA_UNMCH_EN

Enable ADV self address unmatched interrupt. This bit is valid only if PRIV_1_2 PRIV_1_2 and PRIV_1_2_SCAN are set.
SCANA_TX_ADDR_NOT_SET_INTR_EN

Enable SCANA RPA TX not set interrupt. This bit is valid only if PRIV_1_2 and PRIV_1_2_SCAN are set.
RPT_SELF_ADDR_MATCH_PRIV_MISMATCH_SCN

This bit controls the SCAN engine behavior when an self address match occurs but a privacy mismatch occurs 0 - The packet is aborted 1 - The packet is received and reported to the Link Layer firmware This bit is valid only if PRIV_1_2 and PRIV_1_2_SCAN are set.
BACKOFF_ENABLE

Enable random backoff feature in scanner. 1 - enable 0 - disable
SCAN_CHANNEL_MAP

Advertising channels that are enabled for scanning operation. Bit 15: setting 1 - enables channel 39 for use. Bit 14: setting 1 - enables channel 38 for use. Bit 13: setting 1 - enables channel 37 for use.

Links

()

Register License

Copyright 2016-2018 Cypress Semiconductor Corporation \n Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License.
You may obtain a copy of the License at \n
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and
limitations under the License.

 ()

Register Reference

https://github.com/cmsis-svd/cmsis-svd-data